Due to popular demand, MXP has released a cat-back, quad tip exhaust system for the BMW 335i. This exhaust is available in full stainless steel or titanium. In addition to the weight savings on the titanium version, it has a blue gradient finish on the tips, mufflers, and resonators.

Please note, this exhaust requires bumper modification to fit the quad tip design. The factory bumper can be cut with a dremel to allow fitment, or if you currently have an M-Tech bumper, you can purchase a quad tip diffuser plate to swap out with the bumper.

Stainless Steel Version
MSRP: $3,167.00
Our Price: $3,008.34 SHIPPED
Click here to order the Stainless Steel version

Titanium Version
MSRP: $5,833.00
Our price: $5,541.35 SHIPPED
Click here to order the Titanium version

We just got a large shipment of Matte Black Enkei RPF1 wheels in 17×9.0″ +45, 5×114.3. Matte black is often on backorder, so get your set while you can. Please order through our website or give us a call during office hours. Thanks!

Click here to order

Blox forged aluminum lug nuts are now also available in silver finish. The silver is a raw metal look, perfect for those who don’t want the flashiness of chrome.

Click here to order.

A new shipment of Volk Racing TE37V has just arrived. The following sizes are in stock and ready to ship.

15X7.5 +25, 4-100 BRONZE
15X7.5 +25, 4-100 GUNMETAL/DC LIP
15X8.0 +25, 4-100 BRONZE
15X8.0 +25, 4-100 GUNMETAL/DC LIP

Please give us a call to order!

PH: 626.336.3400, Mon-Fri, 9am-6pm PST

(click and drag left or right to rotate)

We’ve just received a shipment of TE37 SL wheels! The following sizes are in stock and ready to ship:

18×9.5″ +40
18×9.5″ +35
18×10.5″ +22
18×11″ +18
17×7.5″ +40
17×8.5″ +40
17×9.0″ +22
17×9.5″ +12

Please give us a call to check availability of sizes or to order.

PH: 626.336.3400, Mon-Fri, 9am-6pm PST

We now have Muteki spline drive lug nuts availabe in purple, in both closed and open ended versions. Mutekis have been extremely popular over the years since it’s a slim lug and fits most aftermarket whees. Available in a variety of colors, it’s an easy and inexpensive way to change the look of the car.

We now offer Wheel Mate Conversion Studs for new model Mini Coopers. The factory lug bolts are 14×1.25mm. Many of the Mini enthusiasts want to use aftermarket lugs with the purchase of upgraded wheels. The problem is that most aftermarket lugs are M12 sized. These studs provide an inexpensive solution by converting the M14 on the factory hub down to M12. You can then use aftermarket lugs that are sized at 12×1.5mm. Not only that, you’ll also be able to stop using those annoying wheel bolts. We do recommend using Locktite when installing these studs.

Click here to order

GReddy has just released their XL Titanium Exhaust System for the Nissan GT-R R35. This was created after Greddy successfully increased the R35 to 1,000+ horsepower with their twin TD06SH-20G turbo upgrade. The Y-pipe back exhaust system is made from 100% titanium and is extremely light, weighing only 29lbs in comparision to factory exhaust at 60+ lbs. The piping is 94mm (3.7″) straight through. This exhaust is sure to maximize the power for the R35.

SPECIFICATIONS:
- Ti Y-Pipe: 2x 80mm (3.15″) to 94mm (3.7″)
- Ti Mid-pipe: 94mm (3.7″)
- Ti Muffler Section: 94mm (3.7″) to 2x 80mm (3.15″)
- Ti Mufflers: 2x large diameter 80mm (3.15″) oval mufflers
- Ti x4 80mm (3.15″) to x4 Burnt Ti 115mm double wall tips
- 3 piece Exhaust System with V-Band Connections
- Total Y-back Weight: 29lb (Stock: 60+lbs)

Click here to order

Just released, the EVS Tuning Half Shaft Spacer Kit is a highly recommended upgrade for any lowered S2000. These spacers are CNC machined from 6061 grade aluminum. Each piece is anodized red with the EVS Tuning logo laser etched on the side. The bolts and nuts are industrial strength steel, grade 10.9 and zinc plated for corrosion resistance.

When lowering a S2000, its driveshaft angle will need re-adjustments due to the modification of the suspension. When lowering the S2000, unwanted space is created in between the driveshaft roller and spider (inside of the driveshaft), causing the inboard joint to unevenly wear out. The installation of EVS Tuning Half Shaft spacers will help prevent the driveshaft from losing its regular position.

Features:
- CNC machined 6061 grade aluminum construction
- Red anodized finish
- Laser etched EVS Tuning logo
- Zinc plated, grade 10.9 steel bolts and nuts

Click here to order

Evasive Motorsports exclusive 70mm bore, hubcentric Kics 10mm spacer for the S2000 and NSX is now back in stock.

Click here to order