Behind The Scenes: Evasive FR-S Tsukuba Circuit Journey

We sit down with Brandon from Bowls Los Angeles to talk about what went down in Japan running the Evasive FR-S at Tsukuba Circuit. So much happened in a short period of time, it was one of the craziest events we’ve ever done. We managed to run a 59 second laptime but there is more to the story than just the time. Check out the video to see the full story!

Video by Bowls Films

Voltex Type 7 Swan Neck GT Wing | Install and Pictures on GReddy FR-S

Last night we installed a Voltex Type 7 Swan Neck GT Wing on the GReddy Scion FR-S! We took some pictures of the installation process which requires cutting into the trunk to fit the clamshell reinforcement for added strength. These reinforcements are pre-drilled and also act as templates for drilling the trunk for an easy install. This ensures accurate points for mounting the wing as well as reducing flex to a minimum. Check out our Flickr
for more pictures!

Click Here To Order.

GTA x SLB 2014 Evasive S2000 V.2 (1:51.777) & FR-S (1:47.474)

Evasive S2000 v.2 at GTA / SLB 2014. We were able to set the fastest time ever on a street tire S2000 with a 1:51.77. This video shows the progression we have made over the years and we will continue the push the limits of this great car.

Edit: Evasive FR-S placed 2nd in Limited RWD class, running a personal best time of 1:47.474. Making it the fastest FR-S time recorded at Buttonwillow Raceway. The car is down on power compare to our competitors as we are running an off the shelve supercharger unit which limited our power output to a little over 400whp. We are still stoked about the time and looking forward to improve on it for 2015 season.

Thank you to our dedicated crew and sponsors for helping make this event awesome!

Limited Edition Matte Black NT03+M

We just got a shipment of Matte Black NT03+M in 18×9.5 / 5×100 / +40 for FR-S and BRZ fitment for a limited time only! This is exclusively available only by Evasive Motorsports. Please give us a call to place an order or if you have any questions!

NT03+M is designed with a perimeter brace ring that enhances the wheel strength so it’s able to resist deformation or distortion from outer forces, resulting in highly accurate steering response and strength. The NT03+M also features a racing twin valve design which allows for accurate monitoring while adjusting the pressure.

Click here to order!

  

Pikes Peak 2014 | Race to the Clouds

Evasive Motorsports’ adventure to Pikes Peak International Hill Climb 2014, narrated by driver Robert “MaxRev” Walker. Watch this short 5-minute video documenting our time in Colorado! Thank you to all fans and our sponsors for your support in another successful race to the clouds!

Special Thanks: Scion, Hankook, HKS, Rays Engineering, Project Mu, KW Suspensions, OS Giken, Koyo, Sparco, Motul, Cusco, Super Pro, Voltex, CraftSquare, Motec, Tint Factory, Meguiar’s

Pikes Peak International Hill Climb 2014 | Preparation

We have been working hard the past few weeks to get the Evasive Scion FR-S ready for Pikes Peak International Hill Climb in Colorado! Last year we had a completion time of 10:59 driven by Rob Walker aka MaxRev. We have been preparing all day and night with major new upgrades to the FR-S such as HKS 2.1 Stroker Kit, HKS camshafts 260/266, Hewland Transmission, Motec M150, and lightened aero including carbon doors, revised carbon splitter, fender louvers, and Varis carbon hood. After analyzing the data we acquired from last year and making the necessary adjustments, we plan to beat our current time substantially. Check out the pictures below for daily progress on the Evasive FR-S.

For more information on Pikes Peak, please visit www.ppihc.com/.

We’d like to thank all of our sponsors for helping us during this project: Scion, HKS, Hankook, KW Suspensions, Rays Engineering, Project Mu, Sparco, OS Giken, Super Pro, Voltex, Motul, Tamon, Cusco, Craftsquare, Tint Factory, Meguiars, Motec

  

  

  

  

  

HKS Hi-Power Single Racing Ti-Tip Exhaust

The HKS Hi Power is now available in a single titanium tip exhaust! It features a 75mm piping with a 97mm diameter tip. Developed for both turbo and naturally aspirated applications, HKS is well known for designing lightweight, high flow exhaust systems with the least amount of bends to retrieve the most power out of your vehicle.

We also offer free shipping!

Click here to order!

  

Dai Yoshihara LS7 BRZ | Video by Bowls LA

Today is qualifying day of Formula D Long Beach Round 1 and we just wanted to wish Dai Yoshihara and the rest of the Formula D drivers good luck for the season! Check out the video above on Dai Yoshihara’s 2014 Subaru BRZ equipped with a Turbo LS7, filmed and produced by Bowls LA.

For tickets and current standings, please visit the official website of Formula DRIFT.
www.formulad.com.

Voltex Type 1V Now Available for FR-S / BRZ

The Voltex Type 1V, originally offered only for the Honda S2000, is now available for the Scion FR-S / Subaru BRZ. Comes in a 1300mm width and 225mm V mount brackets. The 1V retains the “V-mount” look and gives it the illusion that the wing looks longer. Please contact us if you have any questions.

Click here to purchase.
PH: 626.336.3400, Mon-Fri, 9am-6pm PST